TF1230S 350W 8ohm LF Ferrite – Celestion

€ 113,00

Altra disponibilità prevista dal: 15/5/2024

Disponibile su ordinazione

Aggiungi a lista desideri
❔ CHIEDI INFO e OFFERTE.

Descrizione

TF1230S 350W 8ohm LF Ferrite – Celestion
codice: PPEK15300158

Celestion – TF1230S 300W 8ohm – LF Pressed Steel Chassis Loudspeaker – Ferrite
Altoparlante da 12″ con chassis in acciaio stampato, magnete in ferrite, bobina da 3″, potenza 350Watt, impedenza 8ohm
Caratteristiche

  • 600W continuous power handling and 97dB sensitivity
  • Tough 12″ ferrite bass/mid loudspeaker with Kevlar loaded cone
  • Optimised magnet assembly delivers impressive power to weight ratio
  • 3″ high temperature edgewound copper clad aluminium voice coil wound on glass fibre former for enhanced reliability
  • Double roll surround provides exceptional linearity at extremes of cone excursion
  • Robust steel chassis for maximum energy transfer
  • Ideal drop in replacement for Mackie SRM450 v3/v3
    Specifiche Generali
    Nominal diameter: 305mm/12in
    Power rating(1): 300Wrms
    Continuous power rating(2): 600W
    EIA power rating(3): 450W
    Nominal impedance: 8ohm
    Sensitivity(4): 96dB
    Frequency range: 50-4000Hz
    Voice coil diameter: 75mm/3in
    Chassis type: Pressed Steel
    Magnet type: Ferrite
    Magnet weight: 1.7kg/60oz
    Coil material: Edgewound copper clad aluminium
    Former material: Polyimide
    Cone material: Kevlar loaded paper
    Surround material: Cloth-sealed
    Suspension: Single
    Xmax(5): 4.5mm/0.18in
    Gap depth: 8mm/0.31in
    Voice coil winding width: 17mm/0.67in
    Parametri di Thiele-Small(6)
    D: 0.26m/10.24in
    Fs: 58.5Hz
    Mms: 49.92g/1.75oz
    Qms: 3.154
    Qes: 0.492
    Qts: 0.426
    Re: 5.81ohm
    Vas: 59.15lt/2.09ft3
    BI: 14.71Tm
    Cms: 0.148mm/N
    Rms: 5.82kg/s
    Le (at 1kHz): 1.05mH
    Informazioni di Montaggio
    Overall diameter: 317.5mm/12.5in
    Overall depth: 137mm/5.43in
    Cut-out diameter: 283mm/11.14in
    Mounting slot dimensions: 13 x 6.6mm/0.51 x 0.26in
    Number of mounting slots: 8
    Mounting PCD range: 299mm/11.77in
    Unit weight: 4.3kg/9.5lb
    Note
    (1)Tested for two hours using a continuous, band-limited pink noise signal’as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
    (2)Continuous Power Handling is defined as 3dB greater than the AES rating.
    (3)Tested as per the EIA-426-A standard
    (4)Measured on axis at 1W, 1m in 2pi anechoic environment.
    (5)Xmax derived from: (voice coil winding width-gap depth)/2.
    (6)Small signal parameters measured after unit subjected to pre-conditioning signal.

    / pa loudspeakers
    EAN/UPC

    Altra disponibilità prevista dal: 15/5/2024
    A questa data occorre aggiungere circa 7-10 giorni lavorativi per elaborazione e spedizione.