TF0818MR 100W 8ohm LF Ferrite – Celestion

€ 55,00

Esaurito

✔ Ci dispiace, ma questo prodotto al momento non è disponibile e non siamo ancora in grado di fornire una data di approvvigionamento. Se non sei un utente registrato, inserisci qui sotto il tuo indirizzo e-mail e clicca su "Aggiungi a lista di attesa" per essere avvisato quando questo articolo sarà nuovamente disponibile. Se invece sei un utente registrato clicca direttamente sul pulsante....

Aggiungi a lista desideri
❔ CHIEDI INFO e OFFERTE.

Descrizione

TF0818MR 100W 8ohm LF Ferrite – Celestion
codice: PPEK15300022

Celestion – TF0818MR 100W 8ohm – LF Pressed Steel Chassis Loudspeaker – Ferrite
Altoparlante da 8″ con chassis in acciaio stampato, magnete in ferrite, bobina da 1.75″, potenza 100Watt, impedenza 8ohm
Caratteristiche

  • 8″ mid-range loudspeaker provides 99dB sensitivity and 100Wrms (AES standard) power handling
  • 1.75″ high temperature copper voice coil wound on polyimide former for increased reliability
  • Designed for use in large 3-way systems
  • Closed back chassis simplifies cabinet manufacture, eliminating need for separate mid-range enclosure
    Specifiche Generali
    Nominal diameter: 203mm/8in
    Power rating(1): 100Wrms
    Continuous power rating(2): 200W
    EIA power rating(3): 150W
    Nominal impedance: 8ohm
    Sensitivity(4): 99dB
    Frequency range: 800-5000Hz
    Voice coil diameter: 45mm/1.75in
    Chassis type: Pressed steel
    Magnet type: Ferrite
    Magnet weight: 0.57kg/20oz
    Coil material: Round copper
    Former material: Polyimide
    Cone material: Kevlar loaded paper
    Surround material: Treated paper
    Suspension: Single
    Parametri di Thiele-Small
    Fs: 450Hz
    Qts: 6.70ohm
    Le (at 1kHz): 0.34mH
    Informazioni di Montaggio
    Overall diameter: 208mm/8.19in
    Overall depth: 85mm/3.35in
    Cut-out diameter: 183mm/7.20in
    Mounting slot dimensions: 9.5mm x 5.5mm/0.37in x 0.22in
    Number of mounting slots: 4
    Mounting PCD range: 195-199mm/7.68-7.83in
    Unit weight: 1.9kg/4.2lb
    Note
    (1)Tested for two hours using a continuous, band-limited pink noise signal’as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
    (2)Continuous Power Handling is defined as 3dB greater than the AES rating.
    (3)Tested as per the EIA-426-A standard.
    (4)Measured on axis at 1W, 1m in 2pi anechoic environment.

    / pa loudspeakers
    EAN/UPC 739894527842