NTR06-1705D 150W 8ohm LF Neodimio – Celestion

€ 59,00

6 disponibili

Aggiungi a lista desideri
❔ CHIEDI INFO e OFFERTE.

Descrizione

NTR06-1705D 150W 8ohm LF Neodimio – Celestion
codice: PPEK15300061

Celestion – NTR06-1705D 150W 8ohm – LF Die Cast Chassis Loudspeaker – Neodimio
Altoparlante da 6.5″ con chassis in fusione d’alluminio, magnete in neodimio, bobina da 1.75″, potenza 150Watt, impedenza 8ohm
Caratteristiche

  • 6.5″ neodymium magnet woofer providing 150Wrms (AES standard) power handling and 90dB sensitivity
  • 1.75″ high temperature copper clad aluminium voice coil
  • Optimized flux distribution in magnet assembly provides low harmonic distortion
  • Half-roll elastomer surround provides greater excursion and improved modal distribution
  • Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
  • Copper sleeved pole reduces inductive rise for improved HF performance
  • Space efficient chassis profile
    Specifiche Generali
    Nominal diameter: 165mm/6.5in
    Power rating(1): 150Wrms
    Nominal impedance: 8ohm
    Sensitivity(2): 90dB
    Frequency range: 70-7000Hz
    Voice coil diameter: 45mm/1.75in
    Chassis type: Cast aluminium
    Magnet type: Neodymium
    Coil material: Copper clad aluminium
    Former material: Polyimide
    Cone material: Kevlar loaded paper
    Surround material: Elastomer
    Suspension: Single
    Xmax(3): 4.5mm/0.18in
    Gap depth: 6mm/0.24in
    Voice coil winding width: 15mm/0.63in
    Parametri di Thiele-Small
    D: 0.13m/5.12in
    Fs: 59.8Hz
    Mms: 17.52g/0.618oz
    Qms: 8.240
    Qes: 0.446
    Mmd: 16.66g/0.588oz
    Qts: 0.423
    Re: 5.22ohm
    Vas: 10.07lt/0.38ft3
    BI: 8.79Tm
    Cms: 0.404mm/N
    Rms: 0.799kg/s
    Le (at 1kHz): 0.17mH
    Informazioni di Montaggio
    Overall diameter: Max 189mm/7.44in – Min 162mm/6.38in
    Overall depth: 87mm/3.43in
    Cut-out diameter: 150mm/5.9in
    Mounting slot dimensions: 6.5mm x 5.5mm/0.26in x 0.22in
    Number of mounting slots: 4
    Mounting slot PCD range: 173.5mm/6.83in
    Unit weight: 0.95kg/2.09lb
    Note
    (1)Tested for two hours using a continuous, band-limited pink noise signal’as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
    (2)Measured on axis at 1W, 1m in 2pi anechoic environment.
    (3)Xmax derived from: (voice coil winding width-gap depth)/2.
    (4)Small signal parameters measured after unit subjected to pre-conditioning signal.

    / pa loudspeakers
    EAN/UPC 739894564250