€ 229,00
Esaurito
✔ Ci dispiace, ma questo prodotto al momento non è disponibile e non siamo ancora in grado di fornire una data di approvvigionamento. Se non sei un utente registrato, inserisci qui sotto il tuo indirizzo e-mail e clicca su "Aggiungi a lista di attesa" per essere avvisato quando questo articolo sarà nuovamente disponibile. Se invece sei un utente registrato clicca direttamente sul pulsante....
Descrizione
FTX1225 300W 8ohm Coaxial – Celestion
codice: PPEK15300163
Celestion – FTX1225 300W 8ohm – Coaxial
Altoparlante coassiale da 12″ con chassis in fusione d’alluminio, magnete in ferrite, bobina da 2.5″, potenza 300Watt, impedenza 8ohm
Design curato, collaudato e messo a disposizione direttamente da Celestion.
Caratteristiche
– 12″ coaxial loudspeaker with 300Wrms (AES standard) power handling and 97dB sensitivity
– Full range frequency response: 50 – 20,000Hz
– FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence
– Robust cast aluminium chassis is designed to minimize unwanted reflections, further reducing acoustic distortion
– Demodulation ring reduces flux modulation, minimizing electromagnetic distortion
– 2.5″ edgewound copper clad aluminium voice coil wound on high temperature glass fibre former
Specifiche Generali
Size: 305mm/12in
Power rating(1): 300Wrms
Nominal impedance: 8ohm
Sensitivity(2): 97dB
Frequency range: 50-4000Hz
Voice coil diameter: 64mm/2.5in
Chassis type: Cast Aluminium
Magnet type: Ferrite
Magnet weight: 2.3kg/81oz
Coil material: Edgewound copper clad aluminium
Former material: Glass fibre
Cone material: Kevlar loaded paper
Surround material: Cloth-sealed
Suspension: Single
Xmax(3): 4mm/0.16in
Gap depth: 8mm/0.31in
Voice coil winding width: 16mm/0.62in
Parametri di Thiele-Small
D: 0.26m/10.24in
Fs: 47.8Hz
Mms: 49.44g/1.95oz
Qms: 5.714
Qes: 0.409
Mmd: 42.52g/1.5oz
Qts: 0.382
Re: 5.35ohm
Vas: 89.55lt/3.16ft3
BI: 13.94Tm
Cms: 0.224mm/N
Rms: 2.59kg/s
Le (at 1kHz): 0.78mH
Specifiche Generali HF
Power rating(1): 60 Wrms
Nominal impedance: 8ohm
Sensitivity(2): 104dB
Frequency range: 1000-20,000Hz
Recommended min. crossover (12dB/oct): 2000Hz
Voice coil diameter: 45mm/1.75in
Diaphragm and surround material: Polyimide
Informazioni di Montaggio
Overall depth: 168mm/6.61in
Cut-out diameter: 286mm/11.26in
Mounting slot dimensions: 7.5×6.5mm/0.29×0.26in
Number of mounting slots: 8
Mounting PCD range: 298-304mm/11.70-11.97in
Unit weight: 5.9kg/13.0lb
Note
(1)Tested for two hours using a continuous, band-limited pink noisesignal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
(2)Measured on axis at 1W, 1m in 2pi anechoic environment.
(3)Xmax derived from: (voice coil winding width-gap depth)/2.
Fornito senza Crossover
/ pa loudspeakers
EAN/UPC