CDX1-1748 60W 8ohm HF Ferrite – Celestion

€ 89,00

2 disponibili

Aggiungi a lista desideri
❔ CHIEDI INFO e OFFERTE.

Descrizione

CDX1-1748 60W 8ohm HF Ferrite – Celestion
codice: PPEK15300218

Celestion – CDX1-1748 60W 8ohm – HF Compression Driver – Ferrite
Driver a compressione con magnete in ferrite, uscita da 1″, potenza 60Watt, impedenza 8ohm,
diaframma in polymide (poliimmide), fissaggio ad avvitare (screw).
Caratteristiche

  • 1″ exit, ferrite magnet compression driver with 1.75″ edgewound copper clad aluminium voice coil
  • 60Wrms power handling (AES standard) and 110dB sensitivity
  • Next generation Sound Castle soft clamping assembly reduces diaphragm stress for reduced distortion and even greater reliability of performance
  • One piece Polyimide diaphragm and surround
  • Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design
  • Screw fitting, same performance and reliability as the CDX1-1747 with an industry-standard 35mm screw fitting
    Specifiche Generali
    Power rating(1): 60Wrms
    Continuous power rating(2): 120W
    Nominal impedance: 8ohm
    Frequency range: 1000-20,000Hz
    Sensitivity(3): 110dB
    Recommended min. crossover (12dB/oct): 2000Hz
    Voice coil diameter: 44mm/1.75in
    Voice coil material: Edgewound Copper Clad Aluminium
    Magnet type: Ferrite
    Diaphragm material: Polyimide
    Surround material: Polyimide
    Informazioni di Montaggio
    Width: 120mm/4.72in
    Depth: 56mm/2.2in
    Weight: 2.3kg/5.1lb
    Fitting: Screw (35mm, 1.38in dia)
    Throat exit: 25mm/1in
    Trombe Compatibili
    H1SC-9040, H1SC-8050
    Note
    (1)Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal’as per AES standard. Power calculated on minimum impedance.
    (2)Continuous Power Handling is defined as 3dB greater than the AES rating.
    (3)Measured on axis at 1W, 1m, using typical horn, in 2pi anechoic environment.

    / pa compression drivers
    EAN/UPC