CDX1-1430 50W 8ohm HF Neodimio – Celestion

€ 109,00

2 disponibili

Aggiungi a lista desideri
❔ CHIEDI INFO e OFFERTE.

Descrizione

CDX1-1430 50W 8ohm HF Neodimio – Celestion
codice: PPEK15300012

Celestion – CDX1-1430 50W 8ohm – HF Compression Driver – Neodimio
Driver a compressione con magnete in neodimio, uscita da 1″, potenza 50Watt, impedenza 8ohm,
diaframma in alluminio, fissaggio con viti (bolt).
Caratteristiche

  • 1″ exit neodymium compression driver with 1.4″ copper clad aluminium voice coil
  • 50Wrms power handling (AES standard) and 108dB sensitivity
  • Copper sleeve on pole reduces inductive rise for improved HF performance
  • Ferrofluid in magnet gap prevents sensitivity loss through thermal compression
  • Aluminium diaphragm combined with elastomer surround delivers lower distortion performance
  • Finite Element Analysis (FEA) used to optimise both magnet and acoustic design
  • Screw mounting adaptor available
    Specifiche Generali
    Power rating(1): 50Wrms
    Continuous power rating(2): 100W
    Nominal impedance: 8ohm
    Sensitivity(3): 108dB
    Frequency range: 2000-20,000Hz
    Recommended min. crossover (12dB/oct): 2500Hz
    Voice coil diameter: 35mm/1.4in
    Voice coil material: Copper clad aluminium
    Magnet type: Neodymium
    Diaphragm material: Aluminium
    Surround material: Elastomer
    Informazioni di Montaggio
    Maximum width: 90mm/3.5in
    Depth: 58mm/2.3in
    Weight: 0.47kg/1.0lb
    Fitting: Flange (2 x M6 holes on 76mm, 3.0in PCD)
    Throat exit: 25.4mm/1in
    Trombe Compatibili
    H1-9040P, H1-7050 “No Bell”
    Note
    (1)Tested for two hours on plane wave tube using continuous band-limited pink noise as per AES standard. Power calculated on minimum impedance.
    (2)Continuous Power Handling is defined as 3dB greater than the AES rating.
    (3)Measured on axis at 1W/1m, using typical horn, in 2 anechoic environment.

    / pa compression drivers
    EAN/UPC 739894536752